SmallBMS battery management system, for 12V, 24V and 48V lithium (LiFePO4) leisure batteries, designed to work effectively with Victron systems.
SmallBMS battery management system, for 12V, 24V and 48V lithium (LiFePO4) leisure batteries, designed to work effectively with Victron systems.
SmallBMS battery management system, for 12V, 24V and 48V lithium (LiFePO4) leisure batteries, designed to work effectively with Victron systems.
SmallBMS battery management system, for 12V, 24V and 48V lithium (LiFePO4) leisure batteries, designed to work effectively with Victron systems.
SmallBMS battery management system, for 12V, 24V and 48V lithium (LiFePO4) leisure batteries, designed to work effectively with Victron systems.
SmallBMS battery management system, for 12V, 24V and 48V lithium (LiFePO4) leisure batteries, designed to work effectively with Victron systems.
SmallBMS battery management system, for 12V, 24V and 48V lithium (LiFePO4) leisure batteries, designed to work effectively with Victron systems.
SmallBMS battery management system, for 12V, 24V and 48V lithium (LiFePO4) leisure batteries, designed to work effectively with Victron systems.
SmallBMS battery management system, for 12V, 24V and 48V lithium (LiFePO4) leisure batteries, designed to work effectively with Victron systems.
SmallBMS battery management system, for 12V, 24V and 48V lithium (LiFePO4) leisure batteries, designed to work effectively with Victron systems.
SmallBMS battery management system, for 12V, 24V and 48V lithium (LiFePO4) leisure batteries, designed to work effectively with Victron systems.
SmallBMS battery management system, for 12V, 24V and 48V lithium (LiFePO4) leisure batteries, designed to work effectively with Victron systems.

Victron smallBMS

£153.50 inc VAT

The smallBMS with pre-alarm is an all-in-one Battery Management System (BMS) for Victron Energy Lithium Battery Smart batteries. These batteries are Lithium Iron Phosphate (LiFePO4) batteries and are available in 12.8 V or 25.6 V in various capacities. They can be connected in series, parallel and series/parallel so that a battery bank can be built for system voltages of 12 V, 24 V or 48 V. The maximum number of batteries in one system is 20, which results in a maximum energy storage of 84 kWh in a 12 V system and up to 102 kWh in a 24 V* and 48 V* system.

The smallBMS is a simple and inexpensive alternative to the VE.Bus BMS, but does not have a VE.Bus interface and is therefore not suitable for use with VE.Bus MultiPlus and Quattro inverter/chargers.

* To reduce required balancing time, we recommend to use a little different batteries in series as possible for the application. 24 V systems are best built using 24 V batteries. And 48 V systems are best built using two 24 V batteries in series. While the alternative, four 12 V batteries in series, will work, it will require more periodic balancing time. For more information on these batteries, visit the Lithium Smart Battery product page.

SKU: BMS300200200 Category: Tags: ,

Description

Description

Features

  • Load disconnect output: Can be used to control the remote on/off input of a BatteryProtect, Inverters, DC-DC converter or other loads that have remote on/off port functionality. Due to its maximum output current of 1A, it can even control a high-current relay or a contactor. Note that a non inverting or inverting on/off cable may be required, please consult the manual.
  • Pre-alarm output: The pre-alarm output can be used to issue a visible or audible warning when the battery voltage is low and will trip with a minimum delay of 30 seconds before the Load disconnect output is disabled due to cell undervoltage.
  • Charge disconnect output: Can be used to control the remote on/off port of a charger, such as the Phoenix Smart Charger IP43, a Cyrix-Li-Charge relay, a Cyrix-Li-ct Battery Combiner or a BatteryProtect. The output is normally high and becomes free floating in case of imminent low cell voltage or high/low temperature. Note that the Charge disconnect output is not suitable to power an inductive load such as a relay coil.
  • Remote on/off terminal: Both the Load and Charge disconnect output can be controlled remotely via the remote on/off terminal. When off, both outputs will be free floating so that loads and chargers are turned off.
  • LED indicators: The smallBMS has two LED indicators, a blue LED indicating that the Load disconnect output is still high and the cell voltage is above the threshold set in the battery, and a red LED indicating that the Charge disconnect output is low due to high/low cell temperature or high cell voltage.

In the Box

  • 1 x Victron smallBMS V2

Downloads

Unsure?

Our pre-made kits take the guesswork out. They come ready-assembled, complete with DIY schematics and manuals, all included for free. It’s power, simplified.

Building a camper van?

Check out our van kits

Does your tiny home need power?

Try our tiny home kit builder

Why Choose Our Kits?

Full DIY Manual

Our kits come with a full easy-to-follow wiring diagram and manual.

Pre-Made Cabling

Quality and robust cabling, ready for install. No expensive tooling needed!

Technical Support

We won't leave you in the dark during your install, our kits come with technical support during and after installation.

Find the right solar kit for your home, our off grid calculator makes it easy.

Still have questions?

If you’re still not sure what system is right for you, or you just want to chat through the options with one of our advisors contact us using the details below.

Call: 01837 352101
Alternatively you can chat with one of our pre-sales enquiry team via instant messenger.

High quality components from trusted suppliers

There are no reviews yet.

Be the first to review “Victron smallBMS”

Your email address will not be published. Required fields are marked *

Related products

You may also like…