SmartSolar MPPT 250 70-Tr VE.Can (top)
SmartSolar MPPT 150-100-Tr VE Can (right)
SmartSolar MPPT 150-100-Tr VE Can (left)
SmartSolar MPPT 150-100-Tr VE Can (front)
SmartSolar MPPT 150-100-Tr VE Can (front conn)
SmartSolar MPPT 250 70-Tr VE.Can (top)
SmartSolar MPPT 150-100-Tr VE Can (right)
SmartSolar MPPT 150-100-Tr VE Can (left)
SmartSolar MPPT 150-100-Tr VE Can (front)
SmartSolar MPPT 150-100-Tr VE Can (front conn)

SmartSolar MPPT 250/70-Tr VE.Can

£476.42 inc VAT

A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.

The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.

MPPT: Ultra Fast Maximum Power Point Tracking

By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.

Remote Monitoring and Control

Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in Bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet with a GX device, the Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both VictronConnect and VRM are free to use. For remote installations – even when there is no internet connection nearby – you may be able to monitor your MPPT by connecting the  GX LTE 4G.

Control Your Charger Remotely

The MPPT VE.Can SmartSolar charger can be remotely controlled and configured over Bluetooth via the VictronConnect App. This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, and historical data.

Daisy Chain Additional Units

The VE.Can SmartSolar charger is equipped with CAN bus ports. This allows for communication with additional VE.Can SmartSolar chargers. The additional units are simply “daisy chained” to each other with a single RJ45 cable between the individual units.

When connected to each other, all individual VE.Can SmartSolar chargers, will synchronise their charge stages. They can also send their data, via a single cable, to a GX monitoring device.

SKU: SCC125070421 Category: Tags: ,

Description

Description

Bluetooth Smart built-in

The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. VE.Direct – For a wired data connection to a Color Control GX, other GX products, PC or other devices

Ultra-fast Maximum Power Point Tracking (MPPT)

Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30 % compared to PWM charge controllers and by up to 10 % compared to slower MPPT controllers.

VE.Direct

For a wired data connection to a Color Control GX, other GX products, PC or other devices

Battery Life: intelligent battery management

When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months.
The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100 %. From that point onwards, the load disconnect level will be modulated so that a nearly 100 % recharge is achieved about once every week.

  • Programmable battery charge algorithm – See the software section on our website for details.
  • Day/night timing and light dimming option – See the software section on our website for details
  • Internal temperature sensor – Compensates absorption and float charge voltage for temperature.

Optional external battery voltage and temperature sensing via Bluetooth

A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers.

Fully discharged battery recovery function

Will initiate charging even if the battery has been discharged to zero volts.
Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.

In the Box

  • 1 x Victron SmartSolar MPPT Charge Controller

Downloads

Building a camper van?

Check out our van kits

Does your tiny home need power?

Try our tiny home kit builder

Why Choose Our Kits?

Full DIY Manual

Our kits come with a full easy-to-follow wiring diagram and manual.

Pre-Made Cabling

Quality and robust cabling, ready for install. No expensive tooling needed!

Technical Support

We won't leave you in the dark during your install, our kits come with technical support during and after installation.

Find the right solar kit for your home, our off grid calculator makes it easy.

Still have questions?

If you’re still not sure what system is right for you, or you just want to chat through the options with one of our advisors contact us using the details below.

Call: 01837 352101
Alternatively you can chat with one of our pre-sales enquiry team via instant messenger.

High quality components from trusted suppliers

There are no reviews yet.

Be the first to review “SmartSolar MPPT 250/70-Tr VE.Can”

Your email address will not be published. Required fields are marked *

Related products